Correction: Diamond nanowires modified with poly[3-(pyrrolyl)carboxylic acid] for the immobilization of histidine-tagged peptides.

Correction for 'Diamond nanowires modified with poly[3-(pyrrolyl)carboxylic acid] for the immobilization of histidine-tagged peptides' by Palaniappan Subramanian et al., Analyst, 2014, 139, 4343-4349, https://doi.org/10.1039/C4AN00146J.

Borophene Quantum Dots as Novel Peroxidase-Mimicking Nanozyme: A Dual-Mode Assay for the Detection of Oxytetracycline and Tetracycline Antibiotics.

The greater advantages and wide applications of zero-dimensional nanodots inspire researchers to develop new materials. Therefore, novel borophene quantum dots (QDs) were prepared by a hydrothermal liquid exfoliation technique using water medium. The borophene QDs proved to be highly stable in water medium for more than 120 days. The synthesized borophene QDs revealed intrinsic peroxidase mimetic activity using two chromogenic substrates, 3,3',5,5'-tetramethylbenzidine (TMB) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS). The excellent intrinsic peroxidase activity toward TMB and ABTS substrates was executed using optimal reaction conditions (pH, borophene QDs' concentration, incubation time, and temperature). The formation of hydroxyl radicals in the presence of H2O2 upon TMB and ABTS oxidation played a significant role in the peroxidase reaction. The borophene QDs further proved to be successful for the colorimetric detection of antibiotics (oxytetracycline and tetracycline) using both TMB and ABTS peroxidase substrates. The limit of detection (LOD) for oxytetracycline and tetracycline was found to be 1.10 and 1.02 µM using TMB and 1.03 and 1.02 µM using ABTS chromogenic substrates, respectively. In addition, the fluorescence sensing of oxytetracycline and tetracycline over borophene QDs was also examined. The high fluorescence of borophene QDs (turn ON) was quenched (turn OFF) by oxytetracycline and tetracycline through the inner filter effect mechanism. The LOD of the fluorescence sensing of oxytetracycline and tetracycline was 1.14 and 1.08 µM, respectively. Interestingly, the borophene QDs could be used for the sensitive and selective colorimetric and fluorometric sensing of oxytetracycline and tetracycline after 120 days of storage. The synthesized borophene QDs with long-term stability and real sample analysis provide new insight as nanozymes with higher peroxidase mimetic and fluorescence performance and can be further exploited for medical diagnosis and environmental toxicants' detection.

Neutralization of SARS-CoV-2 and Intranasal Protection of Mice with a nanoCLAMP Antibody Mimetic.

Intranasal treatment, combined with vaccination, has the potential to slow mutational evolution of viruses by reducing transmission and replication. Here, we illustrate the development of a SARS-CoV-2 receptor-binding domain (RBD) nanoCLAMP and demonstrate its potential as an intranasally administered therapeutic. A multi-epitope nanoCLAMP was made by fusing a pM affinity single-domain nanoCLAMP (P2710) to alternate epitope-binding nanoCLAMP, P2609. The resulting multimerized nanoCLAMP P2712 had sub-pM affinity for the Wuhan and South African (B.1.351) RBD (KD < 1 pM) and decreasing affinity for the Delta (B.1.617.2) and Omicron (B.1.1.529) variants (86 pM and 19.7 nM, respectively). P2712 potently inhibited the ACE2:RBD interaction, suggesting its utility as a therapeutic. With an IC50 = 0.4 ± 0.1 nM obtained from neutralization experiments using pseudoviral particles, nanoCLAMP P2712 protected K18-hACE2 mice from SARS-CoV-2 infection, reduced viral loads in the lungs and brains, and reduced associated upregulation of inflammatory cytokines and chemokines. Together, our findings warrant further investigation into the development of nanoCLAMPs as effective intranasally delivered COVID-19 therapeutics.

Comparison of the Antibacterial Activity of Selected Deep Eutectic Solvents (DESs) and Deep Eutectic Solvents Comprising Organic Acids (OA-DESs) Toward Gram-Positive and Gram-Negative Species.

Deep eutectic solvents (DESs) have been intensively investigated in recent years for their antibacterial properties, with DESs that comprise organic acids (OA-DESs) showing promising antibacterial action. However a majority of the reports focused only on a limited number strains and techniques, which is not enough to determine the antibacterial potential of a substance. To bridge this gap, the antibacterial activity of classical DESs and OA-DESs is assessed on twelve Gram-negative and Gram-positive bacteria strains, with some of them exhibiting specific resistance toward antibiotics. The investigated formulations of OA-DESs comprise glycolic, malic, malonic, and oxalic acids as representatives of this group. Using a range of microbiological assays as well as physicochemical characterization methods, a major difference of the effectiveness between the two groups is demonstrated, with OA-DESs exhibiting, as expected, greater antibacterial effectiveness than classical DESs. Most interestingly, slight differences in the minimum inhibitory and bactericidal concentration values as well as time-kill kinetics profiles are observed between Gram-positive and Gram-negative strains. Transmission electron microscopy analysis reveals the effect of the treatment of the bacteria with the representatives of both groups of DESs, which allows us to better understand the possible mechanism-of-action of these novel materials.

Solar-Driven Ammonia Production through Engineering of the Electronic Structure of a Zr-Based MOF.

As a hydrogen carrier and a vital component in fertilizer production, ammonia (NH3) is set to play a crucial role in the planet's future. While its industrial production feeds half of the global population, it uses fossil fuels and emits greenhouse gases. To tackle this issue, photocatalytic nitrogen fixation using visible light is emerging as an effective alternative method. This strategy avoids carbon dioxide (CO2) emissions and harnesses the largest share of sunlight. In this work, we successfully incorporated a 5-nitro isophthalic acid linker into MOF-808 to introduce structural defects and open metal sites. This has allowed modulation of the electronic structure of the MOF and effectively reduced the band gap energy from 3.8 to 2.6 eV. Combination with g-C3N4 enhanced further NH3 production, as these two materials possess similar band gap energies, and g-C3N4 has shown excellent performance for this reaction. The nitro groups serve as acceptors, and their integration into the MOF structure allowed effective interaction with the free electron pairs on N-(C)3 in the g-C3N4 network nodes. Based on DFT calculations, it was concluded that the adsorption of N2 molecules on open metal sites caused a decrease in their triple bond energy. The modified MOF-808 showed superior performance compared with the other MOFs studied in terms of N2 photoreduction under visible light. This design concept offers valuable information about how to engineer band gap energy in MOF structures and their combination with appropriate semiconductors for solar-powered photocatalytic reactions, such as N2 or CO2 photoreduction.

Ruthenium Oxide Nanoparticles Immobilized on Ti3C2 MXene Nanosheets for Boosting Seawater Electrolysis.

Seawater electrolysis represents a viable alternative for large-scale synthesis of hydrogen (H2), which is recognized as the most promising clean energy source, without relying on scarce fresh water. However, high energy cost and harmful chlorine chemistry in seawater limited its development. Herein, an effective catalyst based on a ruthenium nanoparticle-Ti3C2 MXene composite loaded on nickel foam (RuO2-Ti3C2/NF) with an open, fine, and homogeneous nanostructure was devised and synthesized by electrodeposition for high performance and stable overall seawater splitting. To drive a current density of 100 mA cm-2, the RuO2-Ti3C2/NF electrode required a small overpotential of 85 and 351 mV for HER and OER in 1 M KOH with only a slight increase in 1 M KOH seawater (156 and 378 mV for, respectively, HER and OER). An assembled RuO2-Ti3C2/NF-based two-electrode cell required an overpotential of only 1.84 V to acquire 100 mA cm-2 in 1 M KOH seawater and maintained its activity for over 25 h. This low cell voltage effectively prevented chlorine electrochemical evolution without anode protection. These promising results open up new avenues for the effective conversion of abundant seawater resources to hydrogen fuel.

Correction: Bilyy et al. Rapid Generation of Coronaviral Immunity Using Recombinant Peptide Modified Nanodiamonds. Pathogens 2021, 10, 861.

In the original publication [...].

Copper iodide nanoparticles supported on modified graphene-based nanocomposite catalyzed CO2 conversion into oxazolidinone derivatives.

We report on the preparation of copper iodide nanoparticles (NPs) immobilized on vitamin B3-modified graphene (CuI/GO-VB) nanocomposite and its application for the synthesis of oxazolidinone compounds using a remarkable carboxylative cyclization method via the reaction of arylacetylene, aldehyde and benzylamine derivatives under an atmospheric pressure of CO2 gas. The CuI/GO-VB catalyst was prepared from graphene oxide (GO), vitamin B3 (VB) and CuI using a two-step procedure; firstly graphene-based composite (GO-VB) was synthesized by the reaction of GO and nicotinoyl chloride, followed by the immobilization of CuI NPs on GO-VB. The CuI/GO-VB nanocomposite was fully identified with X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP-OES), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The catalytic performance of the CuI/GO-VB heterogeneous catalyst was investigated in carboxylative cyclization for the synthesis of oxazolidinone compounds under an atmospheric pressure of CO2 gas at 100οC in solvent-, base-, and additive-free conditions; the corresponding oxazolidinone compounds were obtained in 79-94% yield. The hot filtration results indicated that CuI/GO-VB nanocomposite was a heterogeneous catalyst and showed a good reusability for 5 runs without a significant decrease in its catalytic performance.

Enhancing paracellular and transcellular permeability using nanotechnological approaches for the treatment of brain and retinal diseases.

Paracellular permeability across epithelial and endothelial cells is, in large part, regulated by apical intercellular junctions also referred to as tight junctions (TJs). These junctions contribute to the spatial definition of different tissue compartments within organisms, separating them from the outside world as well as from inner compartments, with their primary physiological role of maintaining tissue homeostasis. TJs restrict the free, passive diffusion of ions and hydrophilic small molecules through paracellular clefts and are important for appropriate cell polarization and transporter protein localisation, supporting the controlled transcellular diffusion of smaller and larger hydrophilic as well as hydrophobic substances. This traditional diffusion barrier concept of TJs has been challenged lately, owing to a better understanding of the components that are associated with TJs. It is now well-established that mutations in TJ proteins are associated with a range of human diseases and that a change in the membrane fluidity of neighbouring cells can open possibilities for therapeutics to cross intercellular junctions. Nanotechnological approaches, exploiting ultrasound or hyperosmotic agents and permeation enhancers, are the paradigm for achieving enhanced paracellular diffusion. The other widely used transport route of drugs is via transcellular transport, allowing the passage of a variety of pro-drugs and nanoparticle-encapsulated drugs via different mechanisms based on receptors and others. For a long time, there was an expectation that lipidic nanocarriers and polymeric nanostructures could revolutionize the field for the delivery of RNA and protein-based therapeutics across different biological barriers equipped with TJs (e.g., blood-brain barrier (BBB), retina-blood barrier (RBB), corneal TJs, etc.). However, only a limited increase in therapeutic efficiency has been reported for most systems until now. The purpose of this review is to explore the reasons behind the current failures and to examine the emergence of synthetic and cell-derived nanomaterials and nanotechnological approaches as potential game-changers in enhancing drug delivery to target locations both at and across TJs using innovative concepts. Specifically, we will focus on recent advancements in various nanotechnological strategies enabling the bypassing or temporally opening of TJs to the brain and to the retina, and discuss their advantages and limitations.

Boron nitride quantum dots-enhanced laser desorption/ionization mass spectrometry analysis and imaging of bisphenol A.

Bisphenol A (BPA) displays harmful effects on the human health, including potent endocrine activity and potential impact on the development of cancer. Analysis BPA residues in water and plastic products attracted considerable attention in the past decades. However, dominantly used conventional analysis techniques are unable to directly and non-destructively identify the correct species of BPA in plastic products. Hence, this study demonstrates the effective utilisation of boron nitride quantum dots (BNQDs) as an inorganic matrix in matrix-assisted laser desorption/ionization mass spectrometry analysis and imaging (MALDI-MS & MSI) for BPA. The presence of abundant hydroxyl and amino groups on the BNQDs' surface is favourable for the formation of hydrogen bonds with BPA, and increases their ionization and chemoselectivity. Intriguingly, the BNQDs matrix offers a distinct signal for phenolic hazardous molecules featuring different hydroxyl groups. The method was applied to detect BPA at nanomolar level in environmental water, and also allowed non-destructive and in situ mapping of BPA in plastics and pacifiers. This research provides a novel strategy for adapting nanomaterials as inorganic matrices for analysis of small molecular pollutants in environmentally relevant samples using MALDI-MS & MSI.

Saturated long chain fatty acids as possible natural alternative antibacterial agents: Opportunities and challenges.

The spread of new strains of antibiotic-resistant pathogenic microorganisms has led to the urgent need to discover and develop new antimicrobial systems. The antibacterial effects of fatty acids have been well-known and recognized since the first experiments of Robert Koch in 1881, and they are now used in diverse fields. Fatty acids can prevent the growth and directly kill bacteria by insertion into their membrane. For that, a sufficient amount of fatty acid molecules has to be solubilized in water to transfer from the aqueous phase to the cell membrane. Due to conflicting results in the literature and lack of standardization methods, it is very difficult to draw clear conclusions on the antibacterial effect of fatty acids. Most of the current studies link fatty acids' effectiveness against bacteria to their chemical structure, notably the alkyl chain length and the presence of double bonds in their chain. Furthermore, the solubility of fatty acids and their critical aggregation concentration is not only related to their structure, but also influenced by medium conditions (pH, temperature, ionic strength, etc.). There is a possibility that the antibacterial activity of saturated long chain fatty acids (LCFA) may be underestimated due to the lack of water solubility and the use of unsuitable methods to assess their antibacterial activity. Thus, enhancing the solubility of these long chain saturated fatty acids is the main goal before examining their antibacterial properties. To increase their water solubility and thereby improve their antibacterial efficacy, novel alternatives may be considered, including the use of organic positively charged counter-ions instead of the conventional sodium and potassium soaps, the formation of catanionic systems, the mixture with co-surfactants, and solubilization in emulsion systems. This review summarizes the latest findings on fatty acids as antibacterial agents, with a focus on long chain saturated fatty acids. Additionally, it highlights the different ways to improve their water solubility, which may be a crucial factor in increasing their antibacterial efficacy. We finish with a discussion on the challenges, strategies and opportunities for the formulation of LCFAs as antibacterial agents.

Petroleum Coke Embedded in Cigarette Butts: All Waste-Derived Solar Evaporator for Effective Water Evaporation.

Solar-driven interfacial evaporation is an eco-friendly solution for tackling the impending water scarcity the world is facing in our century. In this work, a solar-driven interfacial evaporator was prepared from cigarette butts loaded with petroleum coke powder (Filter-PetCoke), a by-product of the oil refinery processes, for the improvement of the absorption of the incident solar light. A comparison between a flat 2D and a 3D evaporator with a surface composed of orderly patterned protrusions of 2.1 cm was carried out to assess the influence of the evaporator configuration on the evaporation performance. The 3D evaporator (3D Filter-PetCoke) achieved by far the best performance (evaporation rate: 1.97 ± 0.08 kg m-2 h-1 and solar conversion efficiency: 93.2 ± 5.4%) among the prepared samples (3D Filter-PetCoke, 3D Filter, 2D Filter-PetCoke, and 2D Filter). In addition, this configuration seems to be adaptable for real and more massive operation because of the geometry of the evaporator. The high efficiency was ascribed to the good heat generation of the petroleum coke and the excellent heat management of the 3D structure of the evaporator. Moreover, this evaporator was resistant to multiple repeated usages without significant efficiency loss and capable of producing drinking water from seawater and Escherichia coli (E. coli)-contaminated water. The findings in this work indicate that this evaporator is pertinent to real situations to supply safe freshwater very efficiently from chemically/biologically contaminated water.